Creative LED Engineering
Resources
Technical guidance and FAQs.
Pixel pitch and viewing distance
Pixel pitch is the center-to-center spacing between adjacent LED pixels. A smaller pitch increases pixel density and supports closer viewing, but it also affects cost, power density and module selection.
| Typical pitch | Common starting point |
|---|---|
| P1.25–P1.56 | Very close-view premium indoor applications |
| P1.875–P2.5 | Retail, museums, corporate and broadcast-conscious projects |
| P3–P4 | Larger indoor spaces, stages and longer viewing distances |
| P4–P10 | Outdoor, façade and long-distance applications |
Procurement checklist
- Overall width, height, radius or 3D CAD geometry
- Minimum and typical viewing distance
- Indoor/outdoor environment and target brightness
- Front or rear maintenance access
- Fixed installation or rental use
- Camera / broadcast refresh-rate requirement
- Control-system preference and input resolution
- Installation location, schedule and local compliance needs
Important engineering note
Published ranges are selection guidance, not a final project specification. Exact electrical, structural, thermal and environmental parameters must be confirmed in the approved technical proposal.